For all needs and purposes.
All our boards are based on a simple basic construction. They consist of support frames cut out of solid aluminum and a batch of aluminum profiles that are attached to the frames with normal screws.
The catch is, if you need to chance the size of your setup, you don't need to buy a new board. You can dismantle the board yourself, get a couple of extra parts, and rebuild it in a different size. Want to go back to the old size? Easy, just whip out your screwdriver again.
After years of planning and prototype boards we made for our own use, we believe we have come up with a solution that will satisfy the needs of almost any type of pedal geek anywhere. Whether you prefer minimal or megalomaniac setups (or like to switch between the two) our boards will adjust to what you need and not vice versa.
You can even have a attach a mini-sized board on top of a bigger one to build a "bi-plane" -setup or go crazy with mismatching colors, your imagination is your only limitation.
Below you can find a list of our basic kit sizes. These ready-made kits, we believe, will satisfy the needs of most gear geeks, but we do also offer you the option of ordering a custom sized board. Bear in mind though, that we can only offer you three different options in depth: 105mm, 305mm and 410mm. These are the set sizes for the aluminum support frames.
Basic kits
- Miniboard: 305mm x 450mm (2 support frames) Designed to fit inside a generic aluminum toolbox carrying case.
- Narrowboard: 305mm x 550mm (3 support frames)
- Longboard: 305mm x 780mm (3 support frames)
- Rackboard: 410mm x 450mm (2 support frames) Designed to fit inside most normal sized rackboxes.
- Mediumboard: 410mm x 550mm
- Hugeboard: 410mm x 780mm
- Custom sizes (in width) also available, ask for more info.